China wholesale AB Series FRL-AL1500 AL2000 Export to India

Short Description:

Feature   AB series lubricator is equivalent AIRTAC series FRL.. Filter out the water molecule and dust, lubricate the oil and regulate the compressed air.   Specification Model AL1500 AL2000 BL2000 BL3000 BL4000 Medium Air Port size(G) 1/8 1/4 1/4 3/8 1/2 Oil capacity 25cm3 90cm3 Max.burst pressure 15kgf/cm2 Max.operating pressure 9.9kgf/cm2 Regulating range 0.5~8.5kgf/cm2 Ambient and media temperature 5~60 celsius d...


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for PU Tubing , Manual Rapid Screw Fitting , DOT Push In Fitting , Welcome any of the inquiries and concerns for our merchandise, we look forward to creating a long-term small business marriage with you in the near long run. get in touch with us today.
China wholesale AB Series FRL-AL1500 AL2000 Export to India Detail:

Feature

 

AB series lubricator is equivalent AIRTAC series FRL..

Filter out the water molecule and dust, lubricate the oil and regulate the compressed air.

 

Specification

Model

AL1500

AL2000

BL2000

BL3000

BL4000

Medium

Air

Port size(G)

1/8

1/4

1/4

3/8

1/2

Oil capacity

25cm3

90cm3

Max.burst pressure

15kgf/cm2

Max.operating pressure

9.9kgf/cm2

Regulating range

0.5~8.5kgf/cm2

Ambient and media temperature

5~60 celsius degree

Recommended oil

Turbin oil ISO VG32

Body material

Aluminum Die-casting

Bowl material

Polycarbonate

Cup cover

-

steel

Weight

0.17kgs

0.25kgs


Product detail pictures:

China wholesale
 AB Series FRL-AL1500 AL2000 Export to India detail pictures


Related Product Guide:
The History of Rubber Hoses
Garden Hoses For Gardening and Other Chores

With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for China wholesale AB Series FRL-AL1500 AL2000 Export to India, The product will supply to all over the world, such as: Qatar , Portugal , Latvia , We now have been making our goods for more than 20 years . Mainly do wholesale , so we've the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we offer good solutions , but also because of our good after-sale service . We are here waiting for yourself for your inquiry.


  • 9 sec per 2 pails 1.2 lit
    The real cycle time of IMM is 10 sec (two cavities mould 1.2 lit pail), running for 3 shifts up to 20 days per month) . My handle fitting machine follows easily the IMM , only is needed, periodically, one employee to collect the finished products and to feed the handles into the buffers.



    Can you repair dents in an automobile with a hair dryer and a can of compressed air? Yes and no. It depends upon the location and severity of the damage. But as I have demonstrated, with a heat gun, $9 worth of Endust Duster, and about 15 minutes, you can achieve some remarkable results.

    Read more at… http://blog.yagelski.com/2011/10/paintless-dent-repair-using-heat-gun.html

    Responses to the most common criticisms:

    Q. Why didn’t you just push the dent out from behind?
    A. This is a hybrid vehicle and there is A/C equipment for battery cooling that is located between the sheet metal and the interior finish. The dent was simply not accessible from the inside.

    Q. Why didn’t you just use a toilet plunger and pull the dent out?
    A. That may have worked on the larger of the two dents, but the surface area of the smaller dent would have made that impossible.

    Q. This video and photos of the dents have been Photoshopped and faked!
    A. Absolutely not. I will gladly attest that this video and the images of the dent, before and after, have not been retouched. I also have a witness who observed the process and would attest the same.

    Q. “Tapping” the panel like you did in the video would have popped the dent out without the heating and cooling.
    A. My attempts to pop the dent out with persuasive tapping by hand and a rubber mallet prior to the heating / cooling did not have any impact.

    Q. This process didn’t help, you can still see the dents!
    A. Yes. if you look closely you can still see the smaller of the two dents. However, the larger of the two is not distinguishable to the casual observer. This process made a significant improvement to the appearance of both dents. It is not a factory perfect repair, but this is not a valuable vehicle either. I could not justify the expense of a professional body shop for a vehicle that is seven years old and +150,000 miles. This process provided a good alternative.

    It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Julie from Uganda - 2016.01.28 18:53
    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Nicole from Grenada - 2015.10.09 19:07

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    WhatsApp Online Chat !