Discount Price SC SU Series Cylinder to Nairobi Manufacturers
Discount Price SC SU Series Cylinder to Nairobi Manufacturers Detail:
Feature
Front, real cover and piston are made of aluminum alloy die – they are made by high precision CNC. Barrel is made of anodised aluminum.
Piston rod is made of chromed carbon steel.
Long time service and maintenance free.
Confirm ISO 15552 Standard.
Specification
Bore (mm) |
32 |
40 |
50 |
63 |
80 |
100 |
125 |
160 |
200 |
250 |
320 |
Motion pattern |
Double acting |
||||||||||
Working medium |
Air |
||||||||||
Mountings |
Basic FA, FB, CA, CB, LB, TC, TC-M |
||||||||||
Working pressure |
1~9.0 Kgf/cm2 |
||||||||||
Proof pressure |
13.5 Kgf/cm2 |
||||||||||
Operating temperature range |
0-70 Celsius degree |
||||||||||
Operating speed range |
50~800 mm/s |
||||||||||
Cushion |
Adjustable cushioning |
||||||||||
Adjustable cushioning stroke |
20mm |
26mm |
45mm |
52mm |
66mm |
||||||
Port size |
G 1/8 |
G 1/4 |
G 3/8 |
G 1/2 |
G3/4 |
G1 |
Bore (mm) |
Standard Stroke |
Max stroke |
Allowable stroke |
||||||||||||||||||||
32 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
|
|
|
|
|
1000 |
2000 |
40 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
|
|
1200 |
2000 |
50 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1200 |
2000 |
63 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
80 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
100 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
125 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
160 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
200 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
250 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
320 |
25 |
50 |
75 |
80 |
100 |
125 |
150 |
160 |
175 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
700 |
800 |
900 |
1000 |
1500 |
2000 |
Product detail pictures:


Related Product Guide:
Garden Hoses For Gardening and Other Chores
Space Saving Air Hose Reel Systems
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Discount Price SC SU Series Cylinder to Nairobi Manufacturers, The product will supply to all over the world, such as: Porto , Belgium , Amman, We are confident that we're able to offer you with opportunities and might be a valuable business partner of you. We look forward to working with you soon. Learn more about the types of goods that we work with or contact us now directly with your inquiries. You are welcome to contact us anytime!
New diaphragm valve from Georg Fischer Piping Systems
Twice the flow with optimized flow contours
The new diaphragm valves have decisive advantages in handling and safety, as well as efficiency. The flow in these new valves is twice that of conventional diaphragm valves. In addition, the central plastic thread, which is used in place of the usual four metal screws, guarantees a corrosion-resistant connection.
Not apparent at first glance, but equally important is the more homogenous thermal expansion behavior achieved by the central plastic thread, which eliminates the need for retightening the valve body. The central thread ensures a consistent seat pressure, guaranteeing leak-tightness up to an operating pressure of 16 bar.
New flow contour of the diaphragm valves
The real technological advances of the new generation of diaphragm valves are actually located on the inside. Thanks to the optimized, turbulence-free flow contour the KV value has been doubled. The rounded contours with soft transitions and radii
mean less abrasion and noise transmission, which adds comfort to daily use. The modified geometry of the valve body results in linear control characteristics — and therefore also consistently stable processes.
How the design affects the flow rate of the diaphragm valves can be seen in an independent comparison in which the new diaphragm valves from GF Piping Systems were tested against conventional diaphragm valves. 100% more flow was achieved on average with the optimized, turbulence-free flow contour. And this of course contributes to the economic efficiency of the diaphragm valves with lower running costs and the lower overall cost for media transport.
Material diversity and guaranteed compatibility
A large variety of materials warrant that the valves are compatible with the processes they are used in, thus ensuring safety. Valve bodies can be made of PVC-U, PVC-C, ABS as well as PP-H, PP-n and PVDF, membranes of EPDM, PTFE, FPM and NBR. This range of materials covers nearly the entire spectrum of chemicals with which the diaphragm valves can come into contact. So it makes no difference what type of media needs to be conveyed: From extremely contaminated or solid-containing to highly pure media, from the chemical process industry to microelectronics or water treatment, from cooling to control applications, everything is now possible. The large diversity of connection options means that the valves can be used universally. Compatibility to the global standards for connections, e.g. ISO, BS,
ASTM, ANSI and JIS, as well as to prEN ISO 16138, ISO9393 or EN558 standards have all been taken into consideration. Outer dimensions and connecting dimensions have not been changed from the preceding models. All the new valves are therefore backward compatible and can be built into existing pipelines.
Design diversity
Standard versions of the diaphragm valves are operated manually via an integrated lockable handwheel, which protects against inadvertent manipulation. An optional self-adjusting electrical feedback unit, installed in just a few simple steps, enables automatic control and regulation of piping systems, as well as reliable process monitoring.
Automation of the valves is possible with the Diastar pneumatic valve actuator. Thanks to the three different pressure categories — up to 6 bar, up to 10 bar and up 3/3 to 16 bar — the pneumatically actuated diaphragm valves are quickly and easily integrated into nearly all piping systems. Integrating the valves into system control is no problem with the corresponding interfaces and the wide array of accessories, so individual solutions are always possible.
For more information visit our website:
http://www.gfps.com/appgate/ecat/common_flow/100005/COM/en/index.html
Imprint:
http://www.gfps.com/content/gfps/com/en/service/footer/imprint.html
Disclaimer:
http://www.gfps.com/content/gfps/com/en/service/footer/disclaimer_gfps.html

Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
