Factory directly supply CVPC-G Straight for Lahore Manufacturer
Factory directly supply CVPC-G Straight for Lahore Manufacturer Detail:
Features
The air flow will stop supply once pulling out the pipe.
One way valve starts when the pressure reach 0.1Kgf/cm²
Easy installing and easy pulling out the pipe
CVPecification
Fluid Admitted |
Air, Vacuum, Water (no freezing) |
Working Pressure |
0—1.0MPa | 0—150psi |
Proof Pressure |
3.0Mpa | 435psi |
Negative Pressure |
-100Kpa | -29.5 In Hg |
Working Temperature |
0—60°C | 32~140°F |
Applicable Tube |
PU / PA / PE / PVC |
Metric Tube ØD | ||||||||||
4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
Inch Tube ØD | ||||||
1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
Thread Standard and Type | |||||||||||
R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread | ||||||||||
R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 |
M6x1 |
M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
UNF |
NPT – 60°American Standard Taper Pipe Thread |
BSPP, G – 55° Parallel Pipe Thread |
||||||
10-32 UNF |
1/8 NPT |
1/4 NPT |
3/8 NPT |
1/2 NPT |
G1/8 |
G1/4 |
G3/8 |
G1/2 |
Tube(Metric)-Thread(G) |
CVPC 4-G01 |
CVPC 4-G02 |
CVPC 4-G03 |
CVPC 6-G01 |
CVPC 6-G02 |
CVPC 6-G03 |
CVPC 8-G01 |
CVPC 8-G02 |
CVPC 8-G03 |
Product detail pictures:

Related Product Guide:
The History of Rubber Hoses
Garden Hoses For Gardening and Other Chores
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory directly supply CVPC-G Straight for Lahore Manufacturer, The product will supply to all over the world, such as: Ecuador , Philadelphia , UK , We've been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we have the whole capacity to supply you happy solutions.
Make your emergency repairs and system extensions easier with the SharkBite® range of Slip Couplings and Slip Tees. Burst pipes, pipe wear & tear and even accidental damage are now as quick and simple to fix as ‘Cut, Push, Done’. Watch now to make a repair in 3 easy steps.

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
