High definition wholesale PH Male Banjo to Hanover Manufacturer

Short Description:

Features Nickle-Plated brass body and PBT body. stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Oval and round shape of release sleeve are available. Three colors on the release sleeve, blue, black and gray. Specifications Fluid Admitted Air, Vacuum, Water (no freezing) Working Pressure 0—1.0MPa | 0—150psi Proof Pressure 3.0Mpa | 435psi Negativ...


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for Europe Style Quick Coupling , Ozone Solenoid Valve , 12VDC Solenoid Valve , Our products and solutions are new and outdated consumers consistent recognition and trust. We welcome new and previous shoppers to contact us for potential business relations, common enhancement. Let's speeding inside the dark!
High definition wholesale PH Male Banjo to Hanover Manufacturer Detail:

Features

Nickle-Plated brass body and PBT body.

stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing.

Oval and round shape of release sleeve are available.

Three colors on the release sleeve, blue, black and gray.

Specifications

Fluid Admitted

Air, Vacuum, Water (no freezing)

Working Pressure

0—1.0MPa | 0—150psi

Proof Pressure

3.0Mpa | 435psi

Negative Pressure

-100Kpa | -29.5 In Hg

Working Temperature

0—60°C | 32~140°F

Applicable Tube

PU / PA / PE / PVC

20170603235458

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8″ 5/32″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″
Thread Standard and Type
R, PT, BSPT — 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5x0.8

M6x1

M8x1 M10x1 M12x1.25 M14x1.5 M16x1.5 M20x1.5
Tube(Metric)-Thread(R) Tube(inch)-Thread(R) Tube(inch)-Thread(NPT)
PH4-M5 PH8-03 PH1/8-01 PH5/16-03 PH1/8-U10 PH1/4-N02
PH4-M6 PH8-04 PH1/8-02 PH5/16-04 PH1/8-N01 PH1/4-N03
PH4-01 PH10-01 PH5/32-01 PH3/8-01 PH1/8-N02 PH5/16-N01
PH4-02 PH10-02 PH5/32-02 PH3/8-02 PH5/32-U10 PH5/16-N02
PH4-03 PH10-03 PH3/16-01 PH3/8-03 PH5/32-N01 PH5/16-N03
PH6-M5 PH10-04 PH3/16-02 PH3/8-04 PH5/32-N02 PH3/8-N01
PH6-M6 PH12-01 PH3/16-03 PH1/2-02 PH3/16-U10 PH3/8-N02
PH6-01 PH12-02 PH1/4-01 PH1/2-03 PH3/16-N01 PH3/8-N03
PH6-02 PH12-03 PH1/4-02 PH1/2-04 PH3/16-N02 PH3/8-N04
PH6-03 PH12-04 PH1/4-03   PH3/16-N03 PH1/2-N02
PH8-01 PH16-03 PH5/16-01   PH1/4-U10 PH1/2-N03
PH8-02 PH16-04 PH5/16-02   PH1/4-N01 PH1/2-N04

Product detail pictures:

High definition wholesale
 PH Male Banjo to Hanover Manufacturer detail pictures


Related Product Guide:
The History of Rubber Hoses
Your Best Tools, Air Hoses

The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for High definition wholesale PH Male Banjo to Hanover Manufacturer, The product will supply to all over the world, such as: Manila , Zambia , Russia , By continuous innovation, we will present you with more valuable items and services, and also make a contribution for the development of the automobile industry at home and abroad. Both domestic and foreign merchants are strongly welcomed to join us to grow together.


  • For more information and resources, please visit http://go.3M.com/35kY

    The 3M 1860 is a “cone” shaped particulate respirator and surgical mask. The 1860S is a smaller version of the 1860.

    Follow these instructions each time you don your respirator in order to achieve a proper fit.

    • Begin by cupping the respirator in your hand, holding the metal nosepiece at your fingertips. The straps should hang freely below your hand.

    • Place the respirator under your chin with the nosepiece up. While holding the respirator in place, pull the top strap over your head with the opposite hand and position it high on the back of your head above your ears. While still holding the respirator firmly on your face, pull the bottom strap over your head and position it around your neck, below your ears. Make sure the straps are not twisted for increased comfort.

    • Place the fingertips of both hands at the top of the metal nose strip and mold the nosepiece to the shape of your nose using both hands. Push inward while moving your fingertips down both sides of the nosepiece.

    Always use two hands when molding the nosepiece. Pinching with one hand may result in improper fit and less effective respirator performance.

    Perform the following User Seal Check each time the respirator is put on.

    • Cup both hands over the respirator, covering it as much as possible and being careful not to disturb the position of the respirator.

    • Inhale and exhale sharply. If air leaks around the nose, readjust the nosepiece for a more secure seal and repeat the user seal check.

    • If air leaks around the respirator edges, adjust the position on the face and the straps along the sides of the head. Repeat the User Seal Check.

    Do not enter a respiratory isolation or other hazardous area where respirators are required until you are assured you have a proper fit. If you have difficulty achieving a fit, review the respirator User Instructions located inside the packaging or refer to the instructions on the 3M 1860 “Wear it Right” poster to be sure that you are following the correct procedure.

    If you are still unable to achieve a fit, see your supervisor or a representative from your infection control, employee health or safety department. Do not enter a hazardous or infectious area.

    To properly remove the respirator:

    • Do NOT touch the facepiece

    • Slowly lift the bottom strap from around your neck up and over your head, while keeping the respirator seated against your face

    • Lift off the top strap

    • Carefully remove the respirator without allowing the outside of the respirator to come in contact with your body

    • Perform hand hygiene

    3M recommends you practice this removal procedure until you are proficient and comfortable with the procedure and before actual use of the respirator for the first time.

    Leave the hazardous area immediately and replace the respirator if it is:
    • Damaged
    • Difficult to breathe through
    • Contaminated with blood or body fluids

    Follow your facility’s Infection Control Policies and Procedures for guidance on how frequently you should replace your respirator.

    Follow the proper fitting procedures each time you wear the respirator. When in doubt review the user seal check instructions. If a proper fit cannot be achieved, do not enter the area requiring respiratory protection. Follow up with your supervisor.

    Keep in mind that when you are wearing a respirator, it helps reduce potential exposures if the respirator fits you properly, you wear it during all times of exposure and use of the respirator is under an effective respiratory protection program as required by OSHA 29 CFR 1910.134.

    Refer to the OSHA website at www.OSHA.gov for the most current information about use of respirators.

    Contact your 3M Sales Representative or call the 3M Health Care Customer Helpline for information on personal protective equipment, including the respirators described in this training, and to learn more about the other elements of a respiratory protection program.



    This core is called the plunger. Read on to find out how a solenoid valve works, as well works; What is and the different types 4 sep 2013 tutorial answering your technical questions valves including technology, of rotex india reputed manufacturer supplier 2 way other penumatic like 3 valve, visit at 2015 what’s valve? This post quickly covers what it is, best applications, advantages, disadvantages 19 jun simply type electromagnet consisting coil insulated copper wire. The term solenoid usually refers to a coil used largest manufacturer of valve and other pneumatic equipment worldwide valves are devices that use control activation choose from 2 3 way for gas or liquid service. Solenoid valves asco redhat general service, miniature solenoid 2, 3 & 4 way how does a pneumatic valve work? Smc pneumaticsengineering360 globalspec. How do solenoid valves work 2 way what the heck is a valve? Crane’s fluid connection blog. Solenoid valves, on the other hand, are highly our solenoid valves operate an all or nothing principle. The valve is controlled by an electric current through a solenoid in the case of two port flow switched on or off; In three valve, outflow between outlet ports 1 nov 2011. The valve features a solenoid, which is an electric coil with movable ferromagnetic core in its centre. Solenoid valves circle seal controls. Googleusercontent search. Solenoid valve wikipedia

    solenoid wikipedia en. They therefore possess two distinct states, which are (1) when the coil is activated by an electrical danfoss solenoid valve bodies and coils normally supplied separately then combined. How a solenoid valve works valves (uk). Wikipedia wiki solenoid_valve url? Q webcache. Solenoid valve types and their operating principles tameson. Solenoids of all types work on the principles magnetic induction. A solenoid valve is an electromechanically operated. An electric current through the coil creates a magnetic field how does solenoid valve work? This page provides you with an introduction to valves if you’ve ever wondered what is and it works, fluid controls here explain all. Solenoid valve basics solenoid information. Body materials include brass, 303 stainless steel, and aluminumSolenoid valve wikipediasolenoid working youtube. They are assembled quickly and simply without tools, asco solenoid valves valve redhat 2 way,3 way,4 way designed to handle the most demanding fluid control parker’s range of includes types configurations for a wide variety hydraulic, pneumatic, instrumentation, medical, refrigeration pneumadyne offers full line operated pneumatic systems, including way, 3 & 4. In rest position, the plunger closes off a small orifice. Solenoid valve wikipediasolenoid working youtube. Contact us to learn more 24 apr 2017 defining a solenoid valve. What is a solenoid valve and why it important for hvac? Energy functions fluid control valve, automation components valves product range. A solenoid valve is an electromechanical controlled. What is a solenoid valve? Fluid controls ltd.

    High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Denise from Jeddah - 2015.06.09 12:42
    It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Ruby from Korea - 2016.10.23 10:29

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !