High reputation for LMF Male to Female Elbow to Botswana Factory

Short Description:

Feature Brass Connector are made of brass bar or forging brass, consist of a wide variety of components. Suit for low and medium pressure pipe line connections. The fluid can be water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas. Specification  Fluid Admitted Water, Refrigeration, Instrumentation, Hydraulic Systems, Grease, Fuels, LP, Natural Gas  Max Working Pressure 8MPa | 1200psi  Working  Temperature -53°C—121°C | -65°F—250°F  Body Natural...


Product Detail

Product Tags

Related Video

Feedback (2)

The incredibly rich projects administration experiences and a person to 1 service model make the substantial importance of organization communication and our easy understanding of your expectations for Pneumatic Ball Control Valves , One Touch Quick Coupling , Speed Controller , Never-ending improvement and striving for 0% deficiency are our two main high-quality policies. Should you need anything, really don't hesitate to make contact with us.
High reputation for LMF Male to Female Elbow to Botswana Factory Detail:

Feature

Brass Connector are made of brass bar or forging brass, consist of a wide variety of components.

Suit for low and medium pressure pipe line connections. The fluid can be water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

Specification

 Fluid Admitted Water, Refrigeration, Instrumentation, Hydraulic Systems, Grease, Fuels, LP, Natural Gas
 Max Working Pressure 8MPa | 1200psi
 Working  Temperature -53°C—121°C | -65°F—250°F
 Body Natural Brass & Nickel Plated Brass
 Applicable Pipe Brass, Bronze, Copper, Steel, Aluminum, Iron Pipe
Thread Standard and Type

PT, R, BSPT – 55° Taper Pipe Thread

R1/8

R1/4

R3/8 R1/2 R1/2 R1/2

BSPP, G – 55° Parallel Pipe Thread

G1/8

G1/4

G3/8

G1/2

G3/4

G1

UNF

NPT – 60°American Standard Taper Pipe Thread

10-32 UNF

1/8 NPT

1/4 NPT

3/8 NPT

1/2 NPT

3/4 NPT

1 NPT

Metric Thread

M5 x 0.8

M6 x 1

M8 x 1

M8 x 1.25

M10 x 1

M10 x 1.25

M12 x 1.25

M12 x 1.5

M14 x 1.5

M16 x 1.5

M20 x 1.5

Model No.

Thread (PT, PP, NPT)

LMF 01

R1/8

LMF 02

R1/4

LMF 03

R3/8

LMF 04

R1/2


Product detail pictures:

High reputation for LMF Male to Female Elbow to Botswana Factory detail pictures


Related Product Guide:
The History of Rubber Hoses
Space Saving Air Hose Reel Systems

Well-run gear, qualified revenue workforce, and superior after-sales companies; We've been also a unified huge loved ones, anyone persist with the organization benefit "unification, determination, tolerance" for High reputation for LMF Male to Female Elbow to Botswana Factory, The product will supply to all over the world, such as: Qatar, Hamburg, Nicaragua, We've got sufficient experience in producing products according to samples or drawings. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together.


  • A machine never fails at a good time. Having a maintenance kit on hand is a good idea. Why? The spark plug could foul on you, the belt could start to slip, the air filter could start to clog or be clogged. Inside your maintenance kit you have all these components so if something happens, that’s all you do, is swap it out. Change the plug, change the air filter, change the belt. There’s very little down time and you’re back in business.

    Maintenance should be done on your machine at least once a year. It all depends on how much you use your machine, the climate you use your machine in. Is it dusty, dry or wet? It all depends on the circumstances but at least once a year.

    Safety is always #1 when doing maintenance on any machine. Make sure the spark plug wire is disconnected from the spark plug.

    Let me show you how to change the air filter on your machine. Find the air filter housing. Take the cover off. There’s your old air filter, you see the dirt in here. Take it out, take your new air filter, put it in. Hook it back on, snap it back in.

    Ok, let’s change your spark plug. Take your spark plug socket, spin it off, take out the old plug. You can see the difference in these two plugs. This one is fouled and this one is brand new. Spin it back on. don’ over tighten it. Just tighten it up, snug it. There ya go.

    Before you do an oil change, you want to make sure you’re wearing eye protection and you’re wearing rubber gloves. First thing you want to do is remove the oil dipstick. This allows air to get in to the crank case.
    this is your oil drain. I’ve made this homemade oil drain funnel so I can direct the oil as it comes out of the machine.
    I’ve put the 10mm wrench on it and watch the oil come out.

    If your engine does not have an oil drain plug, use an oil extractor pump or drain through the oil fill tube.

    Now that all the oil is out of the machine, remove your homemade funnel, take your wrench, tighten up the oil drain plug, take the oil out of your maintenance kit, and put it back in to your machine and make sure you check the level on your oil dip stick because all machines are different and take different amounts of oil.

    If you have further questions, please call us at the Tech Center.

    Visit us on the web at: http://www.drpower.com/
    Find us on Facebook: https://www.facebook.com/drpowerequip/

    We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Louis from Bangalore - 2016.03.07 13:42
    The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Julie from Algeria - 2016.10.25 15:53

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !