Manufactur standard BSLM Sintered Bronze Breather Vent Silencer to Anguilla Importers

Short Description:

Feature Easy to install and maintain, particularly suitable for where space is limited. Brass,Stainless steel,Aluminum alloy,Plastic body,sintered brass powder mesh and stainless steel wire mesh. Used to diffuse air and muffle noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise requirements. Specification  Fluid Admitted Compressed Air Working Pressure 0—1MPa | 150psi  Working Temperature -10°C—80°C | 14°F—176°F  Body...


Product Detail

Product Tags

Related Video

Feedback (2)

Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Nylon Air Tubes , DOT Push In Fitting , Air Brake Hose , We fully welcome customers from all around the entire world to determine secure and mutually advantageous company relationships, to have a shiny future jointly.
Manufactur standard BSLM Sintered Bronze Breather Vent Silencer to Anguilla Importers Detail:

Feature

Easy to install and maintain, particularly suitable for where space is limited.

Brass,Stainless steel,Aluminum alloy,Plastic body,sintered brass powder mesh and stainless steel wire mesh.

Used to diffuse air and muffle noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise requirements.

Specification

 Fluid Admitted

Compressed Air

Working Pressure

0—1MPa | 150psi

 Working Temperature

-10°C—80°C | 14°F—176°F

 Body(noise absorbing material)

Sintered Bronze, Sintered Stainless Steel, Polyethylene

Thread Standard and Type
PT, R, BSPT – 55° Taper Pipe Thread

R1/8

R1/4 R1/4 R1/2 R3/4 R1 R1-1/4 R1-1/2 R2

BSPP, G – 55° Parallel Pipe Thread

G1/8

G1/4

G3/8

G1/2

G3/4

G1

G1-1/4

G1-1/2

G2

UNF

NPT – 60°American Standard Taper Pipe Thread

10-32 UNF

1/8 NPT

1/4 NPT

3/8 NPT

1/2 NPT

3/4 NPT

1 NPT

1-1/4 NPT

1-1/2 NPT

2 NPT

Metric Thread

M5 x 0.8

M6 x 1

M8 x 1

M8 x 1.25

M10 x 1

M10 x 1.25

M12 x 1.25

M12 x 1.5

M14 x 1.5

M16 x 1.5

M20 x 1.5

Model No.

Thread(R,G,NPT)

BSLM 01

1/8

BSLM 02

1/4

BSLM 03

3/8

BSLM 04

1/2

BSLM 06

3/4

BSLM 08

1

BSLM 10

1-1/4

BSLM 12

1-1/2

BSLM 16

2


Product detail pictures:

Manufactur standard
 BSLM Sintered Bronze Breather Vent Silencer to Anguilla Importers detail pictures


Related Product Guide:
Your Best Tools, Air Hoses
Air Cleaners and Purifiers Can Help Prevent Snoring

We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Manufactur standard BSLM Sintered Bronze Breather Vent Silencer to Anguilla Importers, The product will supply to all over the world, such as: Somalia , Qatar , Qatar , Our company's main items are widely used all over the world; 80% of our products exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.


  • Phone : +6 016 565 8788 , Email : our.enquiry.customerservice@gmail.com,

    Manufacturers of Sunshades, Sunshades Aerofoil Horizontal, Sunshades Aerofoil Vertical, Sunshades Box Louver, Sunshades Sliding Shutter, Sunshades Weather Louver, Ceiling Diffusers, Round Swirl Diffuser Sun Series, Directional Ceiling Diffuser, Directional Ceiling Diffuser (Seamless), Directional Ceiling Diffuser Type II, Double Deflection Ceiling Diffuser, Fan Type Swirl Ceiling Diffuser, Multiple Outlet Type Swirl Ceiling Diffuser, Perforated Face Ceiling Diffuser, Plate Type Ceiling Diffuser, Plate Type Round Ceiling Diffuser, Round Ceiling Diffuser, Round Ceiling Diffuser (Curve Blade), Square to Round Ceiling Diffuser, Square to Round Ceiling Diffuser (Curve Blade), Sun Type Swirl Ceiling Diffuser, Linear Diffuser, Light Troffer Ceiling Diffuser, Linear Ceiling Diffuser, Supply Air Grilles, Bar Grille, Double Deflection Supply Air Grille, Supply Air Linear Bar Grille, Return Air Grilles, Curve Blade Return Air Grille, Eggcrate Type Return Air Grille, Louver Type Return Air Grille, Perforated Face Return Air Diffuser, Perforated Face Return Air Grille, Single Deflection Return Air Grille, Transfer Grille, Vent Louver, Louvers, Acoustical Louver, Drainable Heavy-Duty Weather Louver, Heavy-Duty Weather Louver, Sand Louvers, Weather Louver, Jet Diffusers, Ball Spout Jet Diffuser, Ball Type Jet Diffuser, Drum Type Jet Diffuser, Jet Diffuser, Variable Swirl Jet Diffuser, Floor Diffusers, Fan Powered Floor Diffusers, Floor Diffusers, Dampers, Curtain Type Fire Damper, Heavy Duty Non Return Damper, Multi-blade Volume Control Damper, Multiblade Fire Damper, Non Return Damper, Pressure Relief Damper, Round Volume Control Damper, SD-T Smoke Damper, Single Blade Pressure Relief Damper, Damper Actuators, 2-Point & 3-Point Control Actuator (10/20Nm), 2-Point & 3-Point Control Actuator (5Nm), 2-Point & 3-Point Fast-Running Rotary Actuator 8Nm/16Nm, 2-Point Control Spring Return Actuator (5Nm), 2-Point Control Spring Return Actuator (8Nm), Modulating Control Actuator (10/20Nm), Modulating Control Actuator (2-5Nm), VAV Terminal Units, Bypass VAV Terminal Units, Circular VAV Terminal Units, Terminal Units, Accessories, Crown Damper, Deflector Guide Vane, Opposed Blade Damper, Radial Fan Blade Damper, Square To Round Adapter, T-Bar Ceiling Frame, Volume Extractor, Flexible Air Duct And Others, Access Door, Acoustic Panel Constant Air Damper, Duct Collar, DUCTWORK ACCESSORIES, Flexible Tube, Laminar Diffuser, Linear Whirl Diffuser, Perforated Circular Displacement Diffuser, Sensor, Silencer, Rectangular Silencer, Round Silencer, Supplier, Manufacturing, Manufacture, Manufacturer, Industry, Industrial, Factory, Fabricate, Company,

    Our Coverage Area:

    PERAK,
    Ipoh, Teluk Intan, Taiping, Manjung, Sitiawan, Lumut, Kinta, Kuala Kangsar, Batu Gajah, Kampar,

    PENANG,
    Georgetown, Butterworth, Bukit Mertajam, Prai, Perai, Seberang Perai,

    KEDAH,
    Alor Setar, Sungai Petani, Kulim, Kuala Kedah, Kuah, Bukit Kayu Hitam,

    PERLIS,
    Kangar, Kuala Perlis, Padang Besar,

    Phone : +6 016 565 8788 , Email : our.enquiry.customerservice@gmail.com,



    Vacuum Booster with vacuum pump brake booster conversion to Hydro-Boost from SPE∑D Manufacturing.

    Ford GM and Dodge Diesel Truck Hydro-Boost Brake Booster Conversion / Replacements.

    the booster port adapters should already be screwed into your booster, the 90 degree stainless hoses go into them. We try and shrink wrap the reusable fittings to the hoses that they belong to so that you know where they go (there are a lot of different arrangements which makes it hard to do an end all be all print instruction guide, but we will be including that soon). Simply putting the fittings with the hoses they belong to often makes them impossible to get wrong since the big 3 automakers tend to make all power steering hoses with a big fitting and small fitting to each side (so it would be hard for a guy on the assembly line to get hundreds of them wrong by accident).

    GM and Dodge units normally come with banjo fittings into the booster, but for Fords, 99 times out of 100 It goes:

    -Separate the master cylinder from the booster, there is no fluid connection here (only mechanical), so just remove the two – or sometimes three or four – nuts that hold it down to the booster. If you are reusing the master, than just move it off to the side and don’t crack open the brake line fittings. If you are installing a mew master, than take the brake lines off and set the master off to the side with the ports facing up so that the fluid doesn’t leak out onto your bench or floor. Be careful because brake fluid will eat paint, so don’t get it on the fender, and keep water nearby to poor on it in case it does.

    -There are normally 4 bolts holding the vacuum booster onto the firewall, they are normally located under the dash and tend to be inconvenient to get to. The connection that holds the Vacuum booster input rod to the brake pedal will also be found while under the dash. It can be a clevis yoke, heim joint, or standard pedal rod end with a rounded or flat tip that is held in with one of a few types of clips. Detach this clip, then pull the booster out from the engine bay.

    -1st 90 degree stainless hose – Smaller port on the Pump out to the larger port on the booster (accumulator side, the one with only one fitting),

    -2nd 90 degree stainless hose – Smaller Large Port on the Booster to the larger port on the steering box,

    -smaller port on the steering box out to the larger (in) port on the reservoir for the pump with the rubber hose (cut it to the length you need, slip it onto the tube or barb and clamp it down.
    then the hydro-boost return (barb fitting on the side of the booster from the barb to the return line from the box return to the pump. Cut the box to pump line and fit the included T into it with the straight shot going from box to pump. Slip the HB return onto the perpendicular barb

    -Then tighten down all fittings and clamps at each end of each hose.

    -Brake bleeding is the same as normal. Bench bleeding normally leads to brake fluid dribbling out on the fender since so many master cylinders don’t have check valves. ‘Gravity bleeding’ is great in these cases because no air is introduced deep down in your system unless you crack open the bleeder screws at the calipers – which there is no reason to do unless you are changing your calipers at the same time. On a gravity bleed, you just tighten down the brake line fittings into the master, then back them up, cracking them open allows the small bit of air to work its way up as the fluid goes down from the master into the lines. When fluid begins to drip at the port, your brakes are bled.

    If you kept your stock master cylinder, than there would have been no need to crack open the brake lines, so no bleeding of the brakes would have been necessary. You’re good to go once the booster is bolted down to the firewall, master bolted down to the booster, and the booster rod is clipped onto the brake pedal.

    -Fill the p/s reservoir and turn the wheels back and forth to cycle the fluid through the system. Then turn the engine over without starting it to further cycle it through. Keep topping off the reservoir, then run the car, and test drive when the level does not go down anymore. Dextron and/or Mercon ATF (not straight ATF, but Mercon/Dextron), can be added to the system to cut down on the foaming that happens when doing such surgery on the power steering system.

    There is a good truck installation, which is a conversion from vacuum to Hydro-Boost, in another video that we have on Youtube. Just search ’8 lug hydroboost’, or click on this link to watch it, https://www.youtube.com/watch?v=FgC_sQmHlvs.

    Sponsored by SPE∑D Manufacturing (Sweeting Performance Engineering Marketing & Design) Now if doctors could just do for cancer what we do for brakes, we’d be set. Performance Air-Hydraulic Systems, Electric-Hydraulic Brake Systems & Bosch Hydro-Boost™ Kits http://www.powerbrakeservice.net

    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Elvira from Mecca - 2016.02.28 14:19
    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By May from Doha - 2015.09.08 17:09

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !