SPEG Union Tee Reducer
Features
It’s made of stainless steel 316 material with FKM seal.
Working with high pressure and high temperature.
Suitable for use in corrosive environments, to carry aggressive fluids or for any application in the food and chemical industry.
Different shapes and sizes are available
Specifications
Fluid Admitted |
Air, Steam, Water and other liquid |
Working Pressure |
-100kPa—1.2MPa |-14.5—174psi |
Proof Pressure |
3.0Mpa | 435psi |
Negative Pressure |
-100Kpa | -29.5 In Hg |
Working Temperature |
-20—200°C | -4~392°F |
Applicable Tube |
PU / PA / Teflon Tubing |
Body |
316 Stainless Steel |
Seal, O-ring |
FKM/Viton |
Metric Tube ØD | ||||||||||
4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
Inch Tube ØD | ||||||
1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
Thread Standard and Type | |||||||||||
R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread | ||||||||||
R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 |
M6x1 |
M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
UNF |
NPT – 60°American Standard Taper Pipe Thread |
BSPP, G – 55° Parallel Pipe Thread |
||||||
10-32 UNF |
1/8 NPT |
1/4 NPT |
3/8 NPT |
1/2 NPT |
G1/8 |
G1/4 |
G3/8 |
G1/2 |
Model No. |
Tube ΦD |
TubeΦD |
SPEG 06-04 |
6mm |
4mm |
SPEG 08-04 |
8mm |
4mm |
SPEG 08-06 |
8mm |
6mm |
SPEG 10-06 |
10mm |
6mm |
SPEG 10-08 |
10mm |
8mm |
SPEG 12-06 |
12mm |
6mm |
SPEG 12-08 |
12mm |
8mm |
SPEG 12-10 |
12mm |
10mm |
SPEG 14-08 |
14mm |
8mm |
SPEG 14-10 |
14mm |
10mm |
SPEG 14-12 |
14mm |
12mm |
SPEG 16-10 |
16mm |
10mm |
SPEG 16-12 |
16mm |
12mm |
SPEG 16-14 |
16mm |
14mm |