Trending Products PP Plug for Australia Factory

Short Description:

Features Nickle-Plated brass body and PBT body. stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Oval and round shape of release sleeve are available. Three colors on the release sleeve, blue, black and gray. Specifications Fluid Admitted Air, Vacuum, Water (no freezing) Working Pressure 0—1.0MPa | 0—150psi Proof Pressure 3.0Mpa | 435psi Negativ...


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Speed Controller , Timer Drain Valve , High Pressure Solenoid Valve , Our goal is always to enable clients comprehend their plans. We have been creating good endeavours to accomplish this win-win scenario and sincerely welcome you to join us.
Trending Products PP Plug for Australia Factory Detail:

Features

Nickle-Plated brass body and PBT body.

stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing.

Oval and round shape of release sleeve are available.

Three colors on the release sleeve, blue, black and gray.

Specifications

Fluid Admitted

Air, Vacuum, Water (no freezing)

Working Pressure

0—1.0MPa | 0—150psi

Proof Pressure

3.0Mpa | 435psi

Negative Pressure

-100Kpa | -29.5 In Hg

Working Temperature

0—60°C | 32~140°F

Applicable Tube

PU / PA / PE / PVC

20170603235458

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8″ 5/32″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″
Thread Standard and Type
R, PT, BSPT — 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5x0.8

M6x1

M8x1 M10x1 M12x1.25 M14x1.5 M16x1.5 M20x1.5

Tube(Metric)

Tube(inch)

PP 4

PP 5/32

PP 6

PP 3/16

PP 8

PP 1/4

PP 10

PP 5/16

PP 12

PP 3/8

PP 14

PP 1/2

PP 16

 

Product detail pictures:

Trending Products 
 PP Plug for Australia Factory detail pictures


Related Product Guide:
The History of Rubber Hoses
Garden Hoses For Gardening and Other Chores

We offer great strength in quality and development,merchandising,sales and marketing and operation for Trending Products PP Plug for Australia Factory, The product will supply to all over the world, such as: Nepal , Albania , Philippines , We provide OEM services and replacement parts to meet the varying needs of our customers. We give competitive price for quality solutions and we are going to make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.


  • If your ABS light comes on on your Rover 800 (Rover 820/825/827) you can carry out this simple test to see what is causing the fault (FAULT CODES SHOWN BELOW) as the vehicle is fitted with an on-board Self-Diagnostics system.

    The connector to use on the late model Rover 800 Mk2 (96-99) only has 2 wires going to it, so you simply connect them together as shown. On earlier Mk2 Rover 800′s (92-96) the connector should have 4 wires. On the early cars you need to remove the bridge connection that is present, then connect the Yellow/Green wire to the black wire as shown. (to make sure you have the right connector the other two wire should be coloured Yellow/Black & Purple/Grey).

    CODE FAULT

    1-2 Start/End Identification
    1-6 Front Left Solenoid Valve
    1-7 Front Right Wheel
    1-8 Rear Wheels Solenoid Valve
    1-9 Relays or Relay Power Supply

    2-5 Pulsar Ring

    3-5 Return Pump
    3-7 Brake Light Switch
    3-9 Front Left Wheel Speed Sensor Signal

    4-1 Front Left Sensor Continuity
    4-2 Front Right Wheel Speed Sensor Signal
    4-3 Front Right Sensor Continuity
    4-4 Rear Left Wheel Speed Sensor Signal
    4-5 Rear Left Sensor Continuity
    4-6 Rear Right Wheel Speed Sensor Signal
    4-7 Rear Right Sensor Continuity
    4-8 Battery Voltage Too Low

    5-5 Electronic Control Unit
    5-6 Interruption of Fault Codes

    The Self Diagnosis Feature will store up to the last 3 Faults it has recorded, even after the fault has been fixed. To clear the Fault Code Memory after fixing a fault and extinguishing the ABS Fault light on the dashboard. From the iginition on position, switch the ignition OFF then back ON 20, yes, 20 times! (This has been known to cause a fuse or two to pop on a few cars, so you may just need to check everything else is still working OK before you drive off!).

    p.s. Here’s my Top Handy Hint: If you have a fault like mine, where you need an ABS sensor, if you want you can use the ones off the opposite side of the vehicle if you re-use your brackets off the correct side. (Great tip when you find a car in the scappers that only has the wrong side one fitted, because you can still use it.)

    Till Next Time, Have Fun!


    The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Poppy from Malaysia - 2016.05.02 18:28
    We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Elma from Barcelona - 2015.05.15 10:52

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !