Wholesale 100% Original ZFF Female Cross to Qatar Factory

Short Description:

Feature Brass Connector are made of brass bar or forging brass, consist of a wide variety of components. Suit for low and medium pressure pipe line connections. The fluid can be water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas. Specification  Fluid Admitted Water, Refrigeration, Instrumentation, Hydraulic Systems, Grease, Fuels, LP, Natural Gas  Max Working Pressure 8MPa | 1200psi  Working  Temperature -53°C—121°C | -65°F—250°F  Body Natural...


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Noise Silencer , Bronze Sintered Muffler , Pneumatic silencers and Mufflers , We put genuine and health as the primary responsibility. We have now a expert international trade crew which graduated from America. We are your next small business partner.
Wholesale 100% Original ZFF Female Cross to Qatar Factory Detail:

Feature

Brass Connector are made of brass bar or forging brass, consist of a wide variety of components.

Suit for low and medium pressure pipe line connections. The fluid can be water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

Specification

 Fluid Admitted Water, Refrigeration, Instrumentation, Hydraulic Systems, Grease, Fuels, LP, Natural Gas
 Max Working Pressure 8MPa | 1200psi
 Working  Temperature -53°C—121°C | -65°F—250°F
 Body Natural Brass & Nickel Plated Brass
 Applicable Pipe Brass, Bronze, Copper, Steel, Aluminum, Iron Pipe
Thread Standard and Type

PT, R, BSPT – 55° Taper Pipe Thread

R1/8

R1/4

R3/8 R1/2 R1/2 R1/2

BSPP, G – 55° Parallel Pipe Thread

G1/8

G1/4

G3/8

G1/2

G3/4

G1

UNF

NPT – 60°American Standard Taper Pipe Thread

 

10-32 UNF

1/8 NPT

1/4 NPT

3/8 NPT

1/2 NPT

3/4 NPT

1 NPT

Metric Thread

M5 x 0.8

M6 x 1

M8 x 1

M8 x 1.25

M10 x 1

M10 x 1.25

M12 x 1.25

M12 x 1.5

M14 x 1.5

M16 x 1.5

M20 x 1.5

Model No.

Thread (PT, PP, NPT)

ZFF 01

R1/8

ZFF 02

R1/4

ZFF 03

R3/8

ZFF 04

R1/2


Product detail pictures:

Wholesale 100% Original
 ZFF Female Cross to Qatar Factory detail pictures


Related Product Guide:
The History of Rubber Hoses
Air Cleaners and Purifiers Can Help Prevent Snoring

Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Wholesale 100% Original ZFF Female Cross to Qatar Factory, The product will supply to all over the world, such as: Kazakhstan , Turkey , Berlin , Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We'll work whole-heartedly to improve our solutions and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.


  • Shift register all double solenoids



    The calibration of PT 100 sensors in bottom outlet valves, which has to be performed in the course of re-validating process equipment, can be a problem in many cases. The valve has to be removed from the reactor and has to be taken to the workshop where it has to be disassembled in order to remove the PT 100 from inside the valve stem.
    The stocked Pfaudler valve series AMA/APA-BT provides an easy removal of the PT 100. The PT 100 can be removed from the side. Without any additional tools due to the smart design of the connection between the pneumatic elements or the hand wheel and the valve stem. The valve does not need not be removed from the reactor or disassembled for this purpose.
    All components have been designed to avoid the need of additional adjustment work after the reinstallation of the PT 100. And the valve is still absolutely tight of course.
    lt was especially important to the Pfaudler developers to keep the space required for removing the PT 100 as small as possible. This is to ensure that the PT 100 can also be easily removed under the normal conditions prevailing under a reactor, namely, where room is extremely limited.
    Furthermore a stocked conversion kit comprising of a few parts only is available to retrofit existing valves with the option to remove the PT 100 sensor from the side. Again, the bottom outlet valve does not need to be removed from the reactor for this purpose.
    Thus, Pfaudler offers not only the most·compact and light-wejght glassteel bottom outlet valve available on the market, but also one of the most maintenance-friendly ones.
    Due to the modular construction, options like diverse temperature and glasstesting probes and air actuator extensions etc. can be realized easily, even subsequently.

    The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Christine from Lyon - 2015.05.15 10:52
    The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
    5 Stars By Eleanore from Sudan - 2015.09.21 11:01

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !