Air tubing & pneumatic hose

Polyamide (nylon), polyurethane and stainless steel braided hose for compressed-air systems.

Air tubing types

Choose a subcategory to browse tubing models.

Polyamide (PA12) tubing in blue, green, yellow and other colors for standard compressed-air lines.

Polyethylene tubing in clear, blue and red colors for pneumatic, water and inert gas lines.

Polyurethane tubing — flexible, kink-resistant coils in blue, white, black and orange.

Plastic and steel tube cutters for clean, square cuts on PU, nylon and PE pneumatic tubing.

Pre-assembled polyurethane spiral hose kits with brass fittings, single or dual outlet, multiple lengths.

PTFE hose with stainless steel braid for high-temperature, chemical and steam lines.

PU (polyurethane), Nylon (PA), PE and PTFE in flexible and anti-static grades.

Metric ID/OD from 4x2.5 to 16x12 mm and inch 1/4 to 1/2 OD; spiral recoil hose in standard lengths.

PU up to 1.0 MPa at 20 C; nylon up to 1.5 MPa and higher temperature. Check the grade before use.

Yes. All our tubing is sized to seat in push-to-connect fittings without clamps.

Yes. Anti-static (ESD-safe) and food-contact PU/PE are available on request.

Inside the RUICHEN tubing workshop - extrusion, cutting and quality check.